FLOAT SWITCH

 ESMFS Side-Mounted Water Oil Fluid Float Level Switch/Sensor with low cost

 working principle

Float switch (level switch, magnetic float level switch, tank level switch, float sensor, magnetic float level sensor, tank level sensor)The liquid level switch is composed of a reed switch and a float. The reed switch is enclosed in a guide rod. The float is equipped with a ring magnet. When the float moves up and down with the measured level, the internal magnet attracts the reed switch contact action, Thereby detecting the liquid level position as a control or indication of the liquid level.

 Applications:

The main products used in household appliances (such as: water machine, drinking fountains, drinking machine, humidifier, dehumidifier, electric water heaters, air conditioning equipment, home water direct drink system, etc.), industrial equipment (such as: Machinery, beauty equipment, aquaculture and industrial water purification, sewage treatment systems, automatic gating systems and other industries. According to different customers, the special needs of different environments, products are a variety of sizes, a variety of materials optional, can also accept custom.

 Features:

Reed switch contact material for the rhodium (surface covered with rhodium oxide), contact life of up to 200 million times.

special treatment of reed switch can make it in the normal use of high temperature 200 ℃.

Float switch overall performance and reliable, a variety of materials and specifications to choose from

Basic parameters

Material pp Polyethylene acid and alkali

1, contact capacity: 10W / 50W SPST

2, the maximum voltage: 240VAC / 200VDC

3, the maximum switching current: 0.5A

4, the maximum current: 1A

5, can be reversed action: YES

6, the maximum working pressure: ATM

7, the working temperature: -20 ~ 80 ° C

8, Material: PP

Installation Instructions:

1, the installation location should be far away from the inlet, otherwise the switch will be due to fluctuations in the inlet caused by malfunction.

2, the control line load must match the float switch contact capacity.

3, the proportion of the measured liquid must be greater than the proportion of the float.

4, the action point of the float has been adjusted according to customer requirements at the factory, please do not arbitrarily adjust the float position.

Daily maintenance:

Regularly remove dirt from the guide and the float (depending on the media).

Check if the buckle is loose.